PET product addition
Confirm the mixing method, addition amount and processing conditions according to the actual PET grade and product use.
Application highlights
- PET carrier, added to PET products
- Reference addition amount 2.5%～3%
- Arrange samples according to dryness, colour and moulding state
PET plastic / mixed and moulded
PET antimicrobial masterbatch
Silver-based antimicrobial masterbatch with PET as the carrier, used for the production of PET products. After mixing the antibacterial components with raw materials, they enter the processing link, focusing on checking the resin drying, dispersion, colour and part performance to match the antibacterial requirements with the existing process.
- Applicable materials
- PET plastic
- Application method
- Forming after mixing
- Reference addition amount
- 2.5%～3%
Dosage reference: 2.5% ~ 3%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
What applications is PET antimicrobial masterbatch suitable for?
Materials with requirements on appearance
Simultaneously compare colour, light transmission and surface condition, pay attention to the thickness of the part and the influence of other colour masterbatch additives.
Drying and processing management
Incorporate raw material drying and production conditions into sample records to facilitate subsequent small batch verification.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / off-white
- carrier
- PET
- Active system
- Silver antibacterial system
- moisture content
- ≤ 0.5%
- Packaging specifications
- 20 kg / bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 2.5%～3%
masterbatch is added during the raw material mixing stage, and is fully mixed with the corresponding resin before moulding. We provide metering and processing suggestions for matching models.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Resin and uses
- PET grade, moulding method, target use and appearance requirements.
- Process information
- Confirm the drying and processing conditions according to the current resin instructions, and supplement the information on recycled materials and additives.
- Verification key points
- Dispersion, colour difference, appearance and material properties, and antibacterial evaluation based on actual parts.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model PET antimicrobial masterbatch.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 2.5% to 3%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the small trial, the PET grade, raw material drying conditions and actual uses were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare PET treated samples and control samples, and mark them separately with the masterbatch samples from the same batch without addition; indicate the model number, addition amount and processing date. |
| Processing and appearance | Compare transparency, colour difference and surface condition; record raw material pre-treatment and moulding conditions. |
| Function verification | Antibacterial evaluation of moulded parts, and sample testing under usage conditions such as water washing and aging. |
Frequently asked questions
About PET antimicrobial masterbatch
How do PET products match the masterbatch carrier?
This product uses PET carrier and is mixed with PET base material in the raw material mixing stage. Engineers provide mixing and moulding suggestions based on resin grade, colour materials and processing routes.
How do you support from sample preparation to mass production?
PET antimicrobial masterbatch reference dosage is 2.5%~3%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for PET antimicrobial masterbatch can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
PET What records need to be kept for the antimicrobial masterbatch pilot test?
Keep the PET grade, raw material drying conditions and actual uses, as well as the masterbatch model, batch, addition amount, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and then the antibacterial evaluation of the finished product is arranged.
