First clarify the respective tasks of moisture absorption and mould prevention
Packaging moisture comes from the release of packaging air, products and excipients, and the entry of external water vapour. We combine finished product drying, internal and external packaging sealing with hygroscopic material configuration to provide packaging moisture-proof solutions.
Ordinary packaging, moisture-absorbing and anti-mould packaging can be selected separately.
Silica gel desiccant and Bio Dry are used to absorb moisture in packaging, and W-2-F and BIOARMOR anti-mould bags are used to prevent mould in packaging. We configure according to the needs of protected space, finished product materials and moisture and mould resistance.
The small bag and the drying rod inside the container correspond to different spaces.
We design moisture absorption positions according to the single product bag, inner box and outer carton. The container configuration covers the cabinet type, loading layout, water content of cartons and pallets, and voyage. Complete container condition, leakage, and loading and unloading rainproof inspections before container loading.
Record taking, packaging and arrival inspection together
The packaging line is used according to the shift, and is sealed in time after being put in, and the remaining materials are kept in an airtight seal. Use complete small packages and keep them in place with sharp objects and sensitive surfaces; record the specifications, quantity and location, and optimize the configuration based on the arrival status.
Related technical practices
Frequently asked questions
Can Bio Dry and W-2-F anti-mould bags be interchanged according to the same weight?
Bio Dry is mainly used for moisture absorption and W-2-F supporting packaging to prevent mould. We select according to the finished product material, packaging space and functional requirements, and provide a combination layout plan.
BIOARMOR Is the anti-mould and antibacterial bag an ordinary desiccant?
It is a packaging anti-mould product with mustard extract as the main ingredient. Whether additional hygroscopic materials are needed should be determined based on the moisture content of the product and packaging material.
Is the quantity of one box of container drying rods equivalent to one container?
No. The packing quantity is the supply specification, and the single container configuration needs to be determined based on the container type, loading, moisture content of the goods and packaging, route and transportation cycle.
Is it okay to open the outer packaging in advance and use it slowly on the packaging line?
Take out according to the needs of the shift, seal it in time after putting it in, and store the remaining materials in a sealed and moisture-proof store. During the unpacking inspection, check the sealing and material status, and restore the packaging accordingly.
