PC plastic parts
Join in the raw material stage, communicate and select around PC grade, colour matching and actual use.
Application highlights
- PC carrier, reference dosage is 4%~5%
- After mixing, confirm drying according to resin and site conditions
- Check transparency, colour difference and moulding surface together
PC plastic / mixed and moulded
PC antimicrobial masterbatch PC10
Using PC as a carrier, it is used for antibacterial addition to PC plastic products. After mixing, drying and moulding are connected. When selecting, focus on the moisture content, transparency, colour difference and surface of the parts of the raw materials, taking into account antibacterial requirements and PC processing requirements.
- Applicable materials
- PC plastic
- Application method
- Forming after mixing
- Reference addition amount
- 4%～5%
Dosage reference: 4% ~ 5%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
PC antimicrobial masterbatch PC10 What applications is it suitable for?
Transparent appearance requirements
Use the actual thickness of the transparent product to make a sample to check the light transmission, colour difference and surface marks.
Connection between drying and production
Mixing and pre-drying are included in the process records, and technical analysis of moulding water marks, bubbles and surface conditions is supported.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / white
- carrier
- PC (data carrier brand is PC110)
- Active system
- Silver-loaded glass antibacterial system
- Active ingredient content
- 10%
- Packaging specifications
- 5 kg/bag, 25 kg/bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Masterbatch and PC base material are thoroughly mixed, and the pre-drying reference is about 120°C for 3 to 4 hours. The engineer will follow the specific process of PC brand and equipment matching.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 4%～5%
The reference for pre-drying of the mixture is about 120°C and 3 to 4 hours. Engineers follow the PC grade and equipment matching process.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Resin information
- PC grade, colour matching, recycling status and target transparency.
- Pre-drying conditions
- The reference for pre-drying is about 120°C, 3 to 4 hours, and the process recommendations for corresponding PC grades and equipment.
- Part verification
- Appearance, size and original mechanical requirements, use actual finished products to arrange antibacterial evaluation.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model PC10.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 4% to 5%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- After mixing PC10 and PC raw materials, pre-dry at a reference temperature of about 120°C for 3 to 4 hours, and then mould using the corresponding PC process. Engineers provide specific drying suggestions based on resin grade and equipment.
- During the lab trial, the PC grade, drying and moulding conditions, and transparency requirements were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare PC test pieces of the same thickness and mark them separately with the same batch without masterbatch samples; indicate the model number, addition amount and processing date. |
| Processing and appearance | Compare the light transmission, colour difference and surface condition of the parts, and keep drying and moulding records. |
| Function verification | Antibacterial evaluation of moulded parts, and sample testing under usage conditions such as water washing and aging. |
Frequently asked questions
About PC antimicrobial masterbatch PC10
How do you support from sample preparation to mass production?
PC antimicrobial masterbatch PC10 Reference addition amount is 4%~5%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for PC antimicrobial masterbatch PC10 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
What records need to be kept for the PC10 trial?
Retain PC grade, drying and moulding conditions, transparency requirements, as well as masterbatch model, batch, addition amount, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and then the antibacterial evaluation of the finished product is arranged.
How to dry and mould PC10 and PC resin?
Mix PC10 and PC resin thoroughly, and pre-dry at approximately 120°C for 3 to 4 hours. Engineers provide specific processes based on PC grades and equipment, and record baking materials and moulding conditions.
