Start from a relatively sealed packaging space
anti-mould card is integrated into the finished product packaging process, eliminating the need to adjust the product formula. We design the placement and quantity according to the protective space of independent inner bags, shoe boxes and outer boxes, and execute them in conjunction with the sealing and packaging lines.
Select series by sheet and packaging line
KeepFresh sheet 4×4cm, 2000 pieces/roll, BIOARMOR sheet 5×2.5cm, 4000 pieces/roll. We design the location according to the packaging level and protective space, and provide physical trial installation of light-coloured or odour-sensitive finished products.
Finally put the film in and cover the box in time.
Arrange the release of the film in the final process of packaging. The finished product and lining are confirmed to be dry before being taken out. After being put in, cover the box or seal the bag as soon as possible. The packaging line takes out the sheets according to the needs of the shift, and the unused parts are promptly returned to the original protective packaging and sealed to shorten the open exposure time. Keep the outer packaging intact during storage, keep it away from moisture, light and fire sources according to the corresponding product requirements, and keep records of opening and use.
Bring the trial fitting results back to subsequent orders
We record the material, box bag size, sealing, sheet position and storage and transportation cycle through actual trial assembly, and optimize the configuration based on the arrival status. When humidity control is required, a desiccant is provided; for existing moldy batches, the repacking solution is used to complete cleaning, drying and packaging material replacement.
Related technical practices
Frequently asked questions
Can shoe boxes with ventilation holes be directly configured as sealed shoe boxes?
We design the position of the film based on the hole position, opening degree, inner bag and lining structure, and match the packaging space and sealing method.
At which step in the packaging is the anti-mould card placed?
is usually arranged in the final packaging process. After confirming the status of the product and packaging materials, put the pieces in place, and then cover the box or seal the bag as soon as possible to avoid leaving it open.
How to deal with unused roll sheets?
Put the product back into the corresponding protective packaging in a timely manner and store it in an airtight seal, and record the opening time; confirm the storage conditions and usage arrangements after opening according to the provided product label and current instructions.
Can anti-mould card replace desiccant?
anti-mould card is used to prevent mould in packaging, and desiccant is used to absorb moisture in the space. We provide combination configurations of the two types of materials based on the moisture content of the finished product and packaging materials, packaging structure, and storage and transportation time.
