Plastic and rubber materials
Can be combined with ABS, PE, PP, PU, TPU, PVC, EVA and other material selections, and arrange samples according to actual processing conditions.
Application highlights
- Adding directions for plastics, silicone and adhesives, etc.
- Set reference amounts separately for plastics and paint adhesives
- Focus on dispersion, colour and processing suitability
Plastics and Rubber Materials / Plastics / Adhesive Addition
Antifungal and antimicrobial agent for plastics and adhesives AEM5700-DC1
Used for anti-mould and antibacterial additives in plastics, silicone and some paints, inks and adhesives. The dispersion method can be selected according to the material, and the processing can be integrated into the mixing, moulding or formulation process.
- Main applications
- Plastic and rubber materials
- Processing method
- Plastic/adhesive addition
- Dosage and process
- According to system reference 0.3%～0.8%
Dosage reference: 0.3%~0.8% according to system reference. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
Application direction of plastic and adhesive antifungal and antibacterial agent AEM5700-DC1
Used for anti-mould and antibacterial additives in plastics, silicone and some paints, inks and adhesives. The dispersion method can be selected according to the material, and the processing can be integrated into the mixing, moulding or formulation process.
silicone and hot melt adhesive
Check the mixing uniformity, curing and original properties of the material before determining the trial conditions.
Coatings and Adhesives
The dispersion, colour and film-forming state of paints, inks and adhesives are verified according to the formula.
02 / Application process
Plastic/adhesive addition to connect with existing processes
We connect the product with the existing production process, provide measurement, addition or surface treatment suggestions, and cooperate with technical work from sample preparation to trial production.
- 01
Material and process matching
Engineers provide dosage and adding process suggestions based on model, formula and use.
- 02
Premix and disperse in small amounts
Pre-mix a small amount of the adapted material and then add it to the entire batch, mix thoroughly and record the conditions.
- 03
Sample preparation and functional evaluation
Check compatibility, appearance and placement status, and then arrange for actual use evaluation.
Metrology and Technology According to system reference 0.3%～0.8%
Refer to 0.3% to 0.8% in the plastic direction, and 0.3% to 0.5% in the paint and adhesive direction. They should be connected to the corresponding ingredients and dispersed evenly.
03 / Selection and pilot test
Formula and processing technology services
Engineers recommend products based on materials and production processes, provide processing conditions and sample preparation suggestions, supporting samples and technical information.
- Material system
- Resin grade, carrier, additives and colour transparency requirements.
- Processing conditions
- Mixing equipment, temperature, residence time and moulding method.
- Verification key points
- Dispersion, odour, appearance, material properties and corresponding anti-mould and antibacterial evaluation.
- Testing and trial production services
- We compare the processed samples with the control samples from the same batch, analyze the process records and material performance, and formulate the addition, processing and quality control suggestions required for trial production.
Safe handling, storage and transportation shall be carried out in accordance with the current product instructions and SDS, and shall be combined with on-site equipment protection and ventilation conditions.
Communication materials and samples
Contact the technical team via message or phone to arrange product recommendation and sample delivery. For mould projects, engineers will conduct cause analysis based on samples, photos, and production, storage and transportation information.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model AEM5700-DC1.
The technical team provides product documents by model and coordinates material application with export procurement information.
Frequently asked questions
About plastic and adhesive antifungal and antimicrobial agent AEM5700-DC1
What applications is AEM5700-DC1, an antifungal and antibacterial agent for plastics and adhesives, suitable for?
Used for anti-mould and antibacterial additives in plastics, silicone and some paints, inks and adhesives. The dispersion method can be selected according to the material, and the processing can be integrated into the mixing, moulding or formulation process.
How to measure and use this product?
The reference addition amount in the plastic direction is 0.3% to 0.8%; the reference addition amount in the paint and adhesive direction is 0.3% to 0.5%. Add evenly to the corresponding ingredients, and provide supporting dispersion and processing services.
What application technology services do you provide?
We provide material selection, measurement and application process services for plastic and adhesive antifungal and antibacterial agent AEM5700-DC1, supporting sample preparation, appearance and corresponding functional evaluation, and follow up on trial production and process adjustment.
How to obtain MSDS, REACH or RoHS information?
MSDS, REACH and RoHS documentation for Antifungal and antimicrobial agent for plastics and adhesives AEM5700-DC1 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
