Plastic addition
Confirm the adaptation direction based on specific resins such as PVC and PE and moulding conditions.
Application highlights
- Plastics, hot melt adhesives and water-based polyurethane directions
- After adding the powder, mix and disperse thoroughly
- Taking into account both appearance and original processing performance
Plastic Adding / Plastic / Hot Melt Adhesive Adding
Antifungal and antibacterial agent for plastics and hot melt adhesives AEM5700-T100
Used for anti-mould and antibacterial addition to plastics, hot melt adhesives, water-based polyurethane and other materials. Adding it during the mixing or formula preparation process is suitable for processing scenarios where prevention and control components need to be introduced into the material body.
- Main applications
- Plastic addition
- Processing method
- Plastic / hot melt adhesive addition
- Reference dosage for small trial
- 0.5%～1%
Dosage reference: 0.5% ~ 1%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
Application direction of plastic and hot melt adhesive antifungal and antibacterial agent AEM5700-T100
Used for anti-mould and antibacterial addition to plastics, hot melt adhesives, water-based polyurethane and other materials. Adding it during the mixing or formula preparation process is suitable for processing scenarios where prevention and control components need to be introduced into the material body.
Hot melt adhesive
Check dispersion, colour and original bonding properties under mixing and processing conditions.
Water-based polyurethane
Conduct a small compatibility test around the specific formula to check the appearance, smell and placement status.
02 / Application process
Plastic/hot melt adhesive addition to connect with existing processes
We connect the product with the existing production process, provide measurement, addition or surface treatment suggestions, and cooperate with technical work from sample preparation to trial production.
- 01
Material and process matching
Engineers provide dosage and adding process suggestions based on model, formula and use.
- 02
Premix and disperse in small amounts
Pre-mix a small amount of the adapted material and then add it to the entire batch, mix thoroughly and record the conditions.
- 03
Sample preparation and functional evaluation
Check compatibility, appearance and placement status, and then arrange for actual use evaluation.
Metrology and Technology 0.5%～1%
The small trial addition amount of AEM5700-T100 can be referenced as 0.5% ~ 1%. Add the powder to the raw materials and mix thoroughly. Combine the actual resin, hot melt adhesive or water-based polyurethane formula with the actual formula, check the dispersion, appearance and bonding or moulding performance, and then determine the production conditions.
03 / Selection and pilot test
Formula and processing technology services
Engineers recommend products based on materials and production processes, provide processing conditions and sample preparation suggestions, supporting samples and technical information.
- Resin and Formula
- Resin grade, adhesive type and other additives.
- On-site process
- Mixing, temperature, residence time and subsequent moulding methods.
- Small test check
- Colour, transparency, dispersion and bonding or moulding performance.
- Testing and trial production services
- We compare the processed samples with the control samples from the same batch, analyze the process records and material performance, and formulate the addition, processing and quality control suggestions required for trial production.
Safe handling, storage and transportation shall be carried out in accordance with the current product instructions and SDS, and shall be combined with on-site equipment protection and ventilation conditions.
Communication materials and samples
Contact the technical team via message or phone to arrange product recommendation and sample delivery. For mould projects, engineers will conduct cause analysis based on samples, photos, and production, storage and transportation information.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model AEM5700-T100.
The technical team provides product documents by model and coordinates material application with export procurement information.
Frequently asked questions
About plastic and hot melt adhesive antifungal and antibacterial agent AEM5700-T100
What applications is AEM5700-T100, an antifungal and antibacterial agent for plastics and hot melt adhesives, suitable for?
Used for anti-mould and antibacterial addition to plastics, hot melt adhesives, water-based polyurethane and other materials. Adding it during the mixing or formula preparation process is suitable for processing scenarios where prevention and control components need to be introduced into the material body.
How to arrange trial testing and addition of AEM5700-T100?
The small trial addition amount of AEM5700-T100 can be referenced as 0.5% ~ 1%. Add the powder to the raw materials and mix thoroughly. Combine the actual resin, hot melt adhesive or water-based polyurethane formula with the actual formula, check the dispersion, appearance and bonding or moulding performance, and then determine the production conditions.
What application technology services do you provide?
We provide material selection, measurement and application process services for plastic and hot-melt adhesive mould and antibacterial agent AEM5700-T100, supporting sample preparation, appearance and corresponding function evaluation, and follow-up on trial production and process adjustment.
How to obtain MSDS, REACH or RoHS information?
MSDS, REACH and RoHS documentation for Antifungal and antibacterial agent for plastics and hot melt adhesives AEM5700-T100 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
