Plastic products
Confirm dispersion and processing suitability according to specific resin grades and moulding conditions.
Application highlights
- ABS, PU, PE, PP, PVC and EVA orientation
- Arrange lab trials separately for plastic and foam materials
- Pay attention to colour, smell and processing suitability
Plastic products / plastic / foam material addition
Plastic and EVA foam antibacterial agent AEM5700-A06
Antibacterial additives for ABS, PU, PE, PP, PVC and EVA foam materials. Integrate antibacterial components into the raw material mixing and processing process, and verify the appearance, smell and moulding conditions of the product.
- Main applications
- Plastic products
- Processing method
- Plastic/foam material addition
- Dosage and process
- 0.3%～0.8%
Dosage reference: 0.3% ~ 0.8%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
Application direction of plastics and EVA foaming antibacterial agent AEM5700-A06
Antibacterial additives for ABS, PU, PE, PP, PVC and EVA foam materials. Integrate antibacterial components into the raw material mixing and processing process, and verify the appearance, smell and moulding conditions of the product.
EVA foam material
Check the cells, density and original properties of the material according to the foaming formula.
Production mixing connection
Confirm the addition sequence according to the equipment and batch size, and check the mixing uniformity.
02 / Application process
Plastic/foam material addition to connect with existing processes
We connect the product with the existing production process, provide measurement, addition or surface treatment suggestions, and cooperate with technical work from sample preparation to trial production.
- 01
Weigh and arrange to join
Weigh according to the selected model and proportion, connect to the existing mixing process and fully disperse.
- 02
Mixing and processing
After sufficient dispersion, process according to material technology, and record the temperature, residence time and dispersion conditions.
- 03
Check finished product samples
Record appearance, processing and material properties and schedule evaluation together with unadded controls.
Metrology and Technology 0.3%～0.8%
The reference addition amount is 0.3% to 0.8%, and the supporting plastics and EVA foam raw materials are mixed, dispersed and formed.
03 / Selection and pilot test
Formula and processing technology services
Engineers recommend products based on materials and production processes, provide processing conditions and sample preparation suggestions, supporting samples and technical information.
- Material formula
- Resin grade, foaming system, colour and other additives.
- Processing technology
- Mixture, temperature, residence time and moulding or foaming conditions.
- Sample evaluation
- Dispersion, appearance, odour, cells, or moulding performance.
- Testing and trial production services
- We compare the processed samples with the control samples from the same batch, analyze the process records and material performance, and formulate the addition, processing and quality control suggestions required for trial production.
Safe handling, storage and transportation shall be carried out in accordance with the current product instructions and SDS, and shall be combined with on-site equipment protection and ventilation conditions.
Communication materials and samples
Contact the technical team via message or phone to arrange product recommendation and sample delivery. For mould projects, engineers will conduct cause analysis based on samples, photos, and production, storage and transportation information.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model AEM5700-A06.
The technical team provides product documents by model and coordinates material application with export procurement information.
Frequently asked questions
About plastics and EVA foam antibacterial agent AEM5700-A06
What applications are plastic and EVA foam antibacterial agent AEM5700-A06 suitable for?
Antibacterial additives for ABS, PU, PE, PP, PVC and EVA foam materials. Integrate antibacterial components into the raw material mixing and processing process, and verify the appearance, smell and moulding conditions of the product.
How to measure and use this product?
The reference addition amount is 0.3% to 0.8%. It is added during the mixing process of plastic and EVA foam raw materials, supporting dispersion, moulding and functional evaluation.
What application technology services do you provide?
We provide material selection, measurement and application process services for plastic and EVA foam antibacterial agent AEM5700-A06, supporting sample preparation, appearance and corresponding functional evaluation, and follow up on trial production and process adjustment.
How to obtain MSDS, REACH or RoHS information?
MSDS, REACH and RoHS documentation for Plastic and EVA foam antibacterial agent AEM5700-A06 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
