PE plastic products
Confirm metering, mixing and dispersion requirements based on specific PE grades and moulding methods.
Application highlights
- PE carrier, silver antibacterial addition direction
- Reference addition amount 2.5%～3%
- PE and EVA foaming samples are arranged separately
PE products / mixed and moulded
PE antimicrobial masterbatch PE101
PE101 uses PE carrier, and the reference addition amount is 2.5% to 3%. It is used for antibacterial addition to PE products and can also be used as a candidate ingredient for EVA foaming. Engineers process and develop according to the moulding or foaming route.
- Applicable materials
- PE products; EVA foam candidate ingredients
- Application method
- Forming after mixing
- Reference addition amount
- 2.5%～3%
Dosage reference: 2.5% ~ 3%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
PE antimicrobial masterbatch PE101 What applications is it suitable for?
EVA foam material
The EVA foaming project is equipped with cross-linking and foaming processes to compare density, cells and rebound.
Different thicknesses and appearances
Prepare samples according to actual wall thickness, colour material and surface requirements, and compare appearance, dispersion and antibacterial performance.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / white
- carrier
- PE
- Active system
- Silver antibacterial system
- moisture content
- ≤ 0.5%
- Packaging specifications
- 5 kg/bag, 25 kg/bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 2.5%～3%
masterbatch is added during the raw material mixing stage, and is fully mixed with the corresponding resin before moulding. We provide metering and processing suggestions for matching models.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Raw materials and formulas
- PE or EVA grades, masterbatch, fillers and other additives.
- Processing conditions
- Mixing, moulding temperature and residence time; foaming items supplement foaming and cross-linking conditions.
- Finished product verification
- Colour, dispersion and original material properties, and then check the antibacterial evaluation of the final product.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model PE101.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 2.5% to 3%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the small trial, the PE grade, colour masterbatch and actual processing procedures were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare PE test pieces or products, and mark them separately with the unadded masterbatch samples from the same batch; indicate the model, addition amount and processing date. |
| Processing and appearance | Compare surface dispersion, colour difference and original part performance, and take samples according to end use. |
| Function verification | Antibacterial evaluation of moulded parts, and sample testing under usage conditions such as water washing and aging. |
Frequently asked questions
About PE antimicrobial masterbatch PE101
How to choose between PE101 and EVA dedicated masterbatch?
PE101 uses PE carrier, and AEM5700-E10 uses EVA carrier. We select routes based on EVA formula, cross-linking and foaming processes, and provide ingredient recommendations based on corresponding models.
How do you support from sample preparation to mass production?
PE antimicrobial masterbatch PE101 Reference addition amount is 2.5%~3%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for PE antimicrobial masterbatch PE101 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
What records need to be kept for PE101 lab trial?
Keep the PE grade, colour masterbatch and actual processing procedures, as well as the masterbatch model, batch, addition amount, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and then the antibacterial evaluation of the finished product is arranged.
