EVA product formula
Add the prevention and control components at the raw material stage, and use the existing formula and mixing equipment to carry out testing.
Application highlights
- EVA carrier, added for EVA products
- Reference addition amount 2%～3%
- Supporting anti-fungal culture and antibacterial evaluation
EVA plastic / mixed and moulded
EVA antimicrobial masterbatch AEM5700-E10
Using EVA as a carrier, it is added during the raw material mixing stage to develop the anti-mould and antibacterial functions of EVA products. We support formulation, moulding and two functional evaluations.
- Applicable materials
- EVA plastic
- Application method
- Forming after mixing
- Reference addition amount
- 2%～3%
Dosage reference: 2% ~ 3%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
EVA Antimicrobial masterbatch AEM5700-E10 What applications is it suitable for?
Softness and foaming system communication
When there is a foaming process, provide the foaming and cross-linking system together, and check the original requirements such as density, rebound and appearance.
Storage, transportation and usage environment
For specific scenarios such as moisture, airtightness, or frequent contact, determine the anti-mould and antibacterial items that need to be evaluated.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / light yellow opaque particles
- carrier
- EVA
- Active system
- Organic active system
- Active ingredient content
- 10%
- Packaging specifications
- 5 kg/bag, 25 kg/bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 2%～3%
AEM5700-E10 is used for mixing raw materials of EVA products, with a reference addition amount of 2% to 3%, and is equipped with anti-mould and antibacterial development.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- EVA formula
- EVA grades, fillers, colour masterbatches, foaming and cross-linking additives.
- Processing method
- Existing mixing, temperature, residence time and product density or hardness requirements.
- Verification arrangements
- Colour, odour, rebound and moulding performance; anti-mould and antibacterial properties are evaluated separately according to use.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model AEM5700-E10.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 2% to 3%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the small trial, the EVA grade, foaming or moulding process, mixing and heating conditions were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare EVA foam parts or moulded test pieces, and mark them separately from the same batch without masterbatch; indicate the model, addition amount and processing date. |
| Processing and appearance | Record the cells, appearance and original product performance, and arrange separate evaluations for anti-mould and antibacterial properties. |
| Function verification | Antifungal culture observation and antibacterial evaluation are carried out separately; when there are requirements for washing, aging or contact, the post-processing conditions should be stated first, and then the evaluation should be arranged according to the corresponding final sample. |
Frequently asked questions
About EVA Antimicrobial masterbatch AEM5700-E10
What carrier and dosage is used for E10?
AEM5700-E10 uses EVA carrier, and the reference addition amount is 2% to 3%. We provide mixing, moulding and anti-mould and antibacterial evaluation services according to the corresponding supplied products.
How do you support from sample preparation to mass production?
EVA Mould-proof antimicrobial masterbatch AEM5700-E10 Reference dosage is 2%~3%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance, mould resistance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for EVA antimicrobial masterbatch AEM5700-E10 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
What records need to be kept for the AEM5700-E10 pilot test?
Retain EVA grade, foaming or moulding process, mixing and heating conditions, and masterbatch model, batch, dosage, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and anti-mould culture observation and antibacterial evaluation are arranged respectively.
