PE product body is mould-proof
Introduce anti-mould components during production to provide selection direction for products that require the material itself to participate in anti-mould.
Application highlights
- PE carrier, oriented to anti-mould requirements
- Reference addition amount 3%～4%
- Arrange mould prevention evaluation based on wet scenes and actual finished products
PE plastic / mixed and moulded
Anti-mould PE masterbatch
Using PE as a carrier, the anti-mould component is added to the material during the raw material mixing stage. For the mould prevention and control needs of PE products, material verification is carried out based on wet use or storage and transportation scenarios, and the colour, dispersion and original processing performance after addition are also checked.
- Applicable materials
- PE plastic
- Application method
- Forming after mixing
- Reference addition amount
- 3%～4%
Dosage reference: 3% ~ 4%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
What applications is the anti-mould PE masterbatch suitable for?
Humidity and storage and transportation scenarios
Determine the sample and evaluation method based on the moisture content, packaging and storage conditions of the material, and coordinate with the moisture control at the production end.
Recipe processing connection
Use masterbatch metering and mixing, paying attention to the dispersion and appearance requirements of colour masterbatch, filler and original resin.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / off-white or light yellow
- carrier
- PE
- Active system
- Organic zinc composite anti-mould system
- moisture content
- ≤ 0.5%
- Packaging specifications
- 20 kg / bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 3%～4%
masterbatch is added during the raw material mixing stage, and is fully mixed with the corresponding resin before moulding. We provide metering and processing suggestions for matching models.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Application environment
- PE grade, parts use, storage and transportation cycle, and moisture or mould conditions.
- Mixing and moulding
- Adding sequence, masterbatch filler, moulding method and on-site temperature.
- Finished product verification
- The anti-mould evaluation is confirmed together with the colour, dispersion, and mechanical requirements, and the unadded control sample is retained.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model Anti-mould PE masterbatch.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 3% to 4%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the small trial, the PE grade, formula, processing procedures and intended use environment were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare the anti-mould PE treated samples and control samples, and mark them separately with the masterbatch samples from the same batch without addition; indicate the model, addition amount and processing date. |
| Processing and appearance | Taking anti-mould culture observation as the main evaluation direction, record the location and range of mould growth on the surface. |
| Function verification | Anti-mould culture observation; when there are requirements for washing, aging or contact, the post-processing conditions should be stated first, and then the corresponding final sample arrangement should be used for evaluation. |
Frequently asked questions
About anti-mould PE masterbatch
and silver series PE antimicrobial masterbatch?
This product is PE material for mould resistance, and the silver-based PE antimicrobial masterbatch is for antibacterial addition; when both functions are required, you can choose the mildewproof and antibacterial PE masterbatch and provide corresponding reviews.
How do you support from sample preparation to mass production?
Anti-mould PE masterbatch reference dosage is 3%~4%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance and mould prevention evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for Anti-mould PE masterbatch can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
Anti-mould PE What records need to be kept for the masterbatch pilot test?
Keep the PE grade, formula, processing procedures and intended use environment, as well as the masterbatch model, batch, addition amount, mixing and moulding conditions. The treated and untreated samples are marked separately; the appearance and original performance are observed at the same time, and then anti-mould culture observation is arranged.
