Composite prevention and control requirements
When PE products involve both mould and antibacterial requirements, the adaptation plan shall be communicated according to the two goals.
Application highlights
- PE carrier, anti-mould and antibacterial compound selection direction
- Reference addition amount 3%～4%
- Separate samples and evaluation conditions for the two functions
PE plastic / mixed and moulded
Anti-mould and antibacterial PE masterbatch
Using PE as a carrier, it is intended for PE products that require both antifungal and antibacterial additions. Using a masterbatch as the direction of composite function selection, we separately check the risk of mould, contact usage scenarios and customer requirements, and then verify the two types of performance with actual materials.
- Applicable materials
- PE plastic
- Application method
- Forming after mixing
- Reference addition amount
- 3%～4%
Dosage reference: 3% ~ 4%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
What applications is the anti-mould and antibacterial PE masterbatch suitable for?
Material processing added
is metered in during the mixing stage, and the formula compatibility is checked based on the colour masterbatch, filler and moulding conditions.
Customer acceptance connection
State the purpose, target market and customer evaluation requirements in advance to facilitate the arrangement of corresponding samples and materials.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / white
- carrier
- PE
- Active system
- Silver-zinc composite and anti-mould active system
- moisture content
- ≤ 0.5%
- Packaging specifications
- 20 kg / bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 3%～4%
masterbatch is added during the raw material mixing stage, and is fully mixed with the corresponding resin before moulding. We provide metering and processing suggestions for matching models.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Functional goals
- Development of supporting materials with anti-mould and antibacterial functions.
- Resin formula
- PE grade, part thickness, masterbatch, filler and original additives.
- Sample inspection
- Appearance, dispersion, mechanical requirements and two types of functional evaluation; if there are aging or durability requirements, confirm them separately.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model Anti-mould and antibacterial PE masterbatch.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 3% to 4%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the small trial, the PE grade, formula, and anti-mould and antibacterial targets that need to be evaluated simultaneously are fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare antifungal and antibacterial PE treated samples and control samples, and mark them separately with the masterbatch samples without addition in the same batch; indicate the model, addition amount and processing date. |
| Processing and appearance | Anti-mould is observed and evaluated through material culture, and antibacterial is carried out according to the corresponding microbiological projects, and the functional performance is recorded respectively. |
| Function verification | Antifungal culture observation and antibacterial evaluation are carried out separately; when there are requirements for washing, aging or contact, the post-processing conditions should be stated first, and then the evaluation should be arranged according to the corresponding final sample. |
Frequently asked questions
About anti-mould and antibacterial PE masterbatch
At the same time, it is anti-mould and antibacterial. Do I need to do two types of verification?
We conduct anti-mould culture and antibacterial evaluation of materials respectively, design samples and test arrangements according to end uses, and analyze the performance of the two functions.
How do you support from sample preparation to mass production?
Anti-mould and antibacterial PE masterbatch reference dosage is 3%~4%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance, mould resistance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for Anti-mould and antibacterial PE masterbatch can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
Anti-mould and antibacterial PE masterbatch What records need to be kept for the pilot test?
Keep the PE brand, formula and anti-mould and antibacterial targets that need to be evaluated simultaneously, as well as the masterbatch model, batch, addition amount, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and anti-mould culture observation and antibacterial evaluation are arranged respectively.
