PE product mix
Use actual PE raw materials to measure and mix to confirm batch uniformity and equipment connection.
Application highlights
- PE carrier, inorganic silver antibacterial system
- Reference addition amount 3%
- Different PE grades and moulding conditions are verified separately.
PE plastic / mixed and moulded
PE silver antimicrobial masterbatch PE103
Silver-based antimicrobial masterbatch with PE as the carrier, used to add raw materials to PE products. The reference dosage is 3%, and it is integrated into the existing moulding process through mixing; the selection focuses on resin, dispersion and finished product use, and the original performance and antibacterial requirements are confirmed.
- Applicable materials
- PE plastic
- Application method
- Forming after mixing
- Reference addition amount
- 3%
Dosage reference: 3%. Engineers provide measurement and processing advice.
Discuss this product / samples Request MSDS / SDS, REACH, RoHS documents 01 / Product Application
PE silver antimicrobial masterbatch PE103 What applications are it suitable for?
Appearance and material requirements
Arrange the sample according to the colour, transparency, thickness and surface requirements to check the changes after addition.
Customer application selection
Clarify the use environment, customer antimicrobial requirements and target markets, and check applicable information and finished product evaluation arrangements.
Product parameters
Materials and Product Specifications
We match the masterbatch according to the base resin and processing method, and provide product specifications, ingredient suggestions and technical information.
- Form/Colour
- Solid particles / white
- carrier
- PE
- Active system
- Inorganic silver antibacterial system
- moisture content
- ≤ 0.5%
- Packaging specifications
- 5 kg/bag, 25 kg/bag
- Storage method
- Store in a sealed, dry and cool place at room temperature, away from moisture and high temperatures
Provide product specifications, packaging and technical information for corresponding models, and support sample selection and procurement.
02 / Application process
Shape after mixing to connect existing production
The masterbatch is metered in during the raw material mixing stage, and is uniformly mixed with the base material before entering the corresponding moulding process.
- 01
Resin matches formula
Engineers match the masterbatch according to the base resin and product use, provide the adding amount and mixing suggestions for the corresponding model, and develop supporting parts from the same batch.
- 02
Measure and mix thoroughly
Weigh the masterbatch and raw materials according to the selected model, mix them thoroughly, and adopt the drying and moulding process corresponding to the matrix resin.
- 03
Moulding and Parts Evaluation
Moulding according to the existing process, comparing the appearance, size and original performance of the parts; we use the processed materials to carry out corresponding functional evaluation.
Reference dosage for small trial 3%
masterbatch is added during the raw material mixing stage, and is fully mixed with the corresponding resin before moulding. We provide metering and processing suggestions for matching models.
03 / Selection and pilot test
From resin formulation to the finished product you deliver
Engineers support masterbatch selection, mixing process and sample testing based on the resin, moulding method and product use.
- Raw material information
- PE grades, masterbatch, recycled materials and other functional additives.
- Production conditions
- Mixing equipment, moulding method, temperature and residence time.
- Evaluation requirements
- Dispersion, appearance and original material properties, combined with actual products to confirm antibacterial performance.
- Testing and trial production services
- We use the same batch of resin to make additive samples and control samples, conduct corresponding functional evaluations, and improve the trial production process based on appearance and processing performance.
The corresponding product SDS is equipped with feeding protection and sealed storage, and the base resin is dried and processed according to the brand process.
Provide formula information, communicate on model selection and send samples
The technical team is responsible for resin and masterbatch matching, ingredient recommendations and sample arrangements, and provides technical and procurement information corresponding to the model.
Inquire about this product / send sample04 / Document requests
Product technical information
We provide relevant information about the corresponding model of MSDS / SDS, REACH, RoHS. You can apply by leaving a message on this page or calling. The technical team also answers questions about material application and export procurement information.
MSDS / SDSOn request
Safety data sheet
Handling, protective measures, storage and transport information.
REACHOn request
REACH documentation
Provide material information and documents for corresponding models to coordinate with the supply chain data of the target market.
RoHSOn request
RoHS documentation
Provide information on corresponding models and applicable project descriptions, and support material selection and supply chain document preparation.
Tell us which documents you need
Include the application and target market in your inquiry. When calling, quote model PE103.
The technical team provides product documents by model and coordinates material application with export procurement information.
Material input and trial arrangement
- The reference addition amount of this model is 3%. It is metered in during the raw material mixing stage, and is fully mixed with the corresponding base material before entering the moulding process.
- Store in a sealed store in a cool, dry place. Be careful to prevent moisture after opening, and keep model and batch records.
- During the lab trial, the PE grade and whether EVA foaming and other other materials were involved were fixed to facilitate comparison of the actual performance of different ratios.
How to prepare treated samples and control samples
| Stage | What needs to be prepared or recorded |
|---|---|
| Sample preparation | Prepare PE film or moulded test pieces, and mark them separately from the same batch without masterbatch; indicate the model, addition amount and processing date. |
| Processing and appearance | PE products are first checked for mixing, dispersion and appearance; other substrates are individually arranged for adaptation trials. |
| Function verification | Antibacterial evaluation of moulded parts, and sample testing under usage conditions such as water washing and aging. |
Frequently asked questions
About PE silver antimicrobial masterbatch PE103
Can 3% of PE103 be a direct replacement for other PE masterbatch proportions?
The reference addition amount of PE103 is 3%, the reference addition amount of PE101 is 2.5%~3%, and PE102 is for LLDPE. We match models according to resin and processing methods, and provide respective ingredients recommendations.
How do you support from sample preparation to mass production?
PE Silver antimicrobial masterbatch PE103 Reference dosage is 3%. Engineers provide metering, mixing and moulding suggestions, coordinate parts dispersion, appearance and antibacterial evaluation, and connect small batch trial production.
How to apply for MSDS, REACH, RoHS information and samples?
MSDS, REACH and RoHS documentation for PE silver antimicrobial masterbatch PE103 can be requested through the contact form on this page or by phone. Our technical team supports procurement documents for the material application and target market.
How do you conduct masterbatch application testing?
We use the moulded additive samples and the control samples from the same batch to carry out anti-mould or antibacterial evaluation. For cleaning, friction or aging use scenarios, test arrangements for corresponding samples are provided to analyze functions and product quality.
What records need to be kept for PE103 lab trial?
Keep the PE brand and whether other materials such as EVA foaming are involved, as well as the masterbatch model, batch, addition amount, mixing and moulding conditions. Treated samples and untreated samples are marked separately; the appearance and original performance are observed at the same time, and then the antibacterial evaluation of the finished product is arranged.
